Time Based Solar Tracking System using Microcontroller

Demand of electrical energy is increasing day by day. So different power sources are being used in modern power system. Researchers are trying to make power systems more and more efficient. Solar tracking system is also a part of that research to make power sources more efficient. Solar tracking is used to extract more power from solar panels by giving solar panels maximum exposure to sunlight. Different techniques have been developed for solar tracking systems.

I have already posted an article on light-based solar tracking systems. You can check the following article:

What is a Time Based Solar Tracking System?

A time-based solar tracking system using a microcontroller involves designing a system that adjusts the position of solar panels or solar collectors based on the time of the day. This ensures that the solar panels are oriented towards the sun for maximum energy harvesting. Here’s a basic outline of how you can implement such a system using a microcontroller:

Time based solar tracking automatically adjusts the position of the solar panel to a more optimum position based on time with the help of a servo motor connected to the solar panel. An algorithm developed with a microcontroller using real-time clock time is used to adjust the position of the solar panel with the help of a DC motor. In this method, a relationship is developed between time and sun position through experiments in the daytime. This table is used to write the algorithm for the time-based tracking system.

Block Diagram

basic block diagram is given below:

time based solar tracking system
time based solar tracking system

Solar panel is connected with a servo motor. The servo motor is interfaced with a servo motor controller. A 5-volt power supply is used to provide power to microcontrollers. A DS1307 real-time clock is used to keep track of real-time information for the microcontroller. Optionally, a liquid crystal display can be used to display the time.

Circuit Diagram

Circuit diagram of time based solar tracking system is given below. ULN2003 is used to control servo motor. I have posted a separate article on how to interface servo motor with pic16f877a microcontroller. Check following article:

Stepper motor interfacing with pic microcontroller

time based solar tracking system circuit diagram

DS1307 is real time clock IC which is used to keep microcontroller update about real time. For more information about DS1307 and its interfacing with microcontroller check following article:

You can easily write code for time-based solar tracking after reading the above-mentioned articles.

You may also like to read:

18 thoughts on “Time Based Solar Tracking System using Microcontroller”

  1. I m upto a project on solar tracker using a 8051 and rtc ….it will be of great help if u would suggest some extension of this project or some unique application of it wgich we could include in the project… please do reply sir

    Reply
  2. Hello good Morning!!! I would like a help, I am doing a school project of a 2 axis solar tracker, and I would like to know if possible to send the crawler program using pic16f877a. I would be very grateful. Thank you!

    Reply
  3. I’m amazed, I must say. Rarely do I encounter a blog that’s
    equally educative and interesting, and without a doubt,
    you’ve hit the nail on the head. The problem is something too few people are speaking intelligently about.
    Now i’m very happy that I found this during my hunt for something relating to this.

    Reply

Leave a Comment