⚠️ Affiliate Disclosure: This post contains Amazon affiliate links. If you purchase through our links, we may earn a small commission at no extra cost to you. Every product below was checked against its live Amazon listing before publishing. Prices change often, so we don’t list them here. Tap any Buy Here button to see the current price on Amazon.
Ultimate Buying Guide
📡 Best 433MHz RF Bridges and RF/IR Hubs
11 RF and IR bridges, fan hubs and DIY radios compared, for putting 433MHz blinds, fans, outlets and remotes on Wi-Fi and Home Assistant.
✅ 11 Picks Reviewed
✅ 433 and 315MHz Notes
✅ Home Assistant Integration
✅ Fixed vs Rolling Code Explained
Millions of homes are full of sub-GHz RF gadgets: motorised blinds, ceiling fans, gas fireplaces, remote outlets, projector screens and doorbells that use cheap 433MHz or 315MHz remotes. They are not on your Wi-Fi, so you cannot automate them. An RF bridge learns those remote signals and replays them on command from an app, a voice assistant or Home Assistant. Most consumer bridges also include an IR blaster, so one box can run the TV and air conditioner too.
This guide starts our 433MHz and sub-GHz smart home series. If you want the raw radio modules for your own builds, see our 433MHz RF transmitter and receiver modules guide; for longer range sub-GHz links, see our LoRa modules guide. We focused on listings with an Add to Cart button and real review counts. Note that the classic SONOFF RF Bridge R2 and RFXCOM transceivers were not available as verified US Amazon listings during our check, so we widened the guide to RF/IR hubs, fan bridges and a DIY radio option.
💡 Reality check before you buy: RF bridges only work with fixed-code remotes. Garage door openers, car keys, most gate openers and many alarm systems use rolling or encrypted codes that cannot be learned, and the Broadlink and Tuya listings here say so. Check the frequency on your remote (often printed on the back or in its FCC ID listing): US gear is commonly 315MHz or 433MHz, while European gear uses 433MHz or 868MHz, and a 433MHz bridge will not talk to a 315MHz or 868MHz remote. Bridges replay commands one way, so most cannot see if someone used the original remote, and states can drift. Only learn remotes for devices you own, and if you wire a relay board like the MHCOZY to mains-powered equipment, use proper enclosures and isolation.
📡 Quick Comparison: All 11 RF Bridges and Hubs
| Product | Type | RF / Protocols | Key Specs (from listing) | Best For | Rating | Buy |
|---|
| 🥇 Broadlink RM4 Pro (with sensor cable) | IR + RF universal hub | 433MHz fixed code, IR | Learns remotes, temp and humidity cable | Best Overall | 4.0 (3,378) | Buy Here → |
| 🌀 BOND Bridge | RF bridge | Fan, fireplace and shade remotes | Wi-Fi, Alexa and Google certified | Best for Ceiling Fans | 4.2 (4,128) | Buy Here → |
| 📡 Broadlink RM4 Pro S | IR + RF universal hub | 433MHz fixed code, IR | Temp and humidity sensor cable | Best Alternative Broadlink | 4.0 (447) | Buy Here → |
| 📶 Broadlink RM4 Pro 433/315MHz | IR + RF universal hub | 433MHz and 315MHz fixed code | No encryption, fixed code only | Best for 315MHz Remotes | 4.0 (267) | Buy Here → |
| 🧩 Broadlink RM MAX (Matter) | IR + RF hub | Wi-Fi, BLE, Matter, 433MHz | Local control, offline scenes | Best Matter Hub | 3.5 (22) | Buy Here → |
| 🔌 BOND Bridge Pro (PoE) | RF bridge | Shades, fans and fireplaces | Ethernet port and PoE | Best Wired Install | 3.5 (76) | Buy Here → |
| 🏠 MoesGo Wi-Fi RF IR Remote | IR + RF universal hub | 433/315MHz fixed code, IR, Tuya | Learns IR and fixed-code RF remotes | Best Tuya Ecosystem Pick | 3.8 (321) | Buy Here → |
| 🪟 MOES Wi-Fi RF IR Remote | IR + RF universal hub | 433/315MHz RF, IR, Tuya | Curtain motors, projectors and AV | Best Budget Tuya Hub | 3.8 (91) | Buy Here → |
| 🔦 Toyanc Wi-Fi IR/RF Hub | IR + RF universal hub | 433.92MHz fixed code, 38kHz IR, Tuya | Not for rolling or hopping code | Most Honest Listing | 3.7 (19) | Buy Here → |
| 🎛️ MHCOZY 4CH Wi-Fi + 433MHz Relay | RF receiving relay | Tuya Wi-Fi, Bluetooth, 433MHz RF | 4 dry contact channels, 5V or AC/DC 7 to 32V | Best RF Receiver Relay | 4.4 (356) | Buy Here → |
| 🛠️ AOICRIE CC1101 Module | DIY RF transceiver | Sub-GHz (315/433/868/915MHz per title) | Transceiver module with SMA antenna | Best DIY Bridge Radio | 4.2 (79) | Buy Here → |
Specs and ratings are taken from the Amazon listings at the time of writing. Ratings and review counts change over time.
🔍 How to Choose an RF Bridge
📻
Match the frequency
Find the frequency of your existing remote. Broadlink RM4 Pro covers 433MHz (one listing adds 315MHz); BOND covers its supported fan and fireplace protocols; CC1101 modules come in band-specific variants.
🔐
Fixed code only
Learning works with fixed-code remotes. Rolling-code garage and gate remotes will not work with any bridge here. Test with a remote you own before relying on it.
🏠
Pick your ecosystem
Broadlink and BOND have local Home Assistant integrations. MOES, MoesGo and Toyanc live in the Tuya Smart Life app. RM MAX adds Matter. DIY CC1101 builds feed MQTT.
🌀
Specialist or generalist
For ceiling fans and fireplaces, BOND’s protocol database is easier. For blinds, outlets, projector screens and mixed IR gear, a learning hub like the RM4 Pro is more flexible.
📍
Placement and range
RF passes walls better than IR, but IR needs line of sight. Put hubs centrally and high; BOND Bridge Pro adds Ethernet and PoE for awkward spots.
🏆 Detailed Reviews: All 11 RF Bridges and Hubs
🥇 BEST OVERALL RF AND IR BRIDGE
1. Broadlink RM4 Pro IR and RF Hub With Sensor Cable
⭐ 4.0/5 from 3,378 ratings · IR Plus 433MHz RF Hub
Sensor
TEMP + HUMIDITY CABLE
The Broadlink RM4 Pro is the most popular way to bring 433MHz remotes onto Wi-Fi. It learns and replays IR (TVs, air conditioners, fans) and 433MHz RF fixed-code commands from one box, and this bundle adds a temperature and humidity sensor cable. The listing is refreshingly clear: it works with fixed-code devices in the 430 to 440MHz range, rolling code is not supported, it runs on 2.4GHz Wi-Fi, and mesh networks are not supported. It works with Alexa, Google and IFTTT. Integration: Home Assistant has a built-in Broadlink integration that sends learned codes locally, which is why this hub is a favourite for RF blinds, fan lights and projector screens. 4.0 stars from 3,378 ratings.
✅ Pros- IR and 433MHz in one hub
- Clear fixed-code compatibility notes
- Local Home Assistant integration
❌ Cons- No rolling-code support
- 2.4GHz only; no mesh Wi-Fi support per listing
🎯 Verdict: The default RF and IR bridge for Home Assistant and Alexa users.
👉 Check Price on Amazon →
🌀 BEST FOR CEILING FANS
2. BOND Bridge for RF Ceiling Fans, Fireplaces and Shades
⭐ 4.2/5 from 4,128 ratings · Wi-Fi for Remote-Controlled Fans
Buy on Amazon →
If your goal is the remote-controlled ceiling fan or gas fireplace, the BOND Bridge is the specialist. The listing says it adds Wi-Fi to ceiling fans, fireplaces and motorised shades, and that BOND’s software currently supports ceiling fans and electric and gas fireplaces, with control from phones, Amazon Echo and Google Home. It is certified by Amazon and Google. Instead of raw code learning, BOND matches your remote to a database of fan protocols, which tends to give cleaner on, off and speed states. Integration: Home Assistant includes a Bond integration that talks to the bridge on your local network. 4.2 stars from 4,128 ratings, the largest review base in this guide.
✅ Pros- Purpose-built for fan and fireplace remotes
- Biggest review base here
- Alexa and Google certified
❌ Cons- Narrower device support than a generic learner
- No general IR remote learning focus
🎯 Verdict: The easiest way to make RF ceiling fans and fireplaces smart.
👉 Check Price on Amazon →
📡 BEST ALTERNATIVE BROADLINK · ⭐ 4.0/53. Broadlink RM4 Pro S IR RF Hub
IR + 433MHz RF, temperature and humidity sensor cable · 447 ratings
Buy Here →
The RM4 Pro S is a variant of the RM4 Pro sold as an IR and RF hub with a temperature and humidity sensor cable, per the listing. It covers the same jobs: learning 433MHz fixed-code remotes for shades and curtains plus IR for AV and climate gear, with Alexa, Google and IFTTT support. Rolling-code devices are not supported. Pick whichever Broadlink listing is in stock, and confirm the sensor cable is included. 4.0 stars from 447 ratings.
✅ Pros: Same IR plus RF coverage; sensor cable included.
❌ Cons: Fixed-code RF only; overlaps the standard RM4 Pro.
🎯 Verdict: A solid stand-in when the main RM4 Pro bundle is unavailable.
📶 BEST FOR 315MHZ REMOTES · ⭐ 4.0/54. Broadlink RM4 Pro IR RF 433/315MHz Fixed Code
433MHz and 315MHz, fixed code, no encryption · 267 ratings
Buy Here →
Many North American gadgets use 315MHz rather than 433MHz. This RM4 Pro listing calls out 433 and 315MHz support in the title, along with the important caveat no encryption, fixed code. It also lists temperature and humidity sensing and Alexa, Google and IFTTT compatibility. If your remote’s FCC label or manual says 315MHz, this is the Broadlink listing to buy. 4.0 stars from 267 ratings.
✅ Pros: Explicit 315MHz and 433MHz support.
❌ Cons: Encrypted and rolling-code remotes will not work.
🎯 Verdict: The Broadlink to pick for 315MHz fixed-code remotes.
🧩 NEWEST: MATTER IR AND RF · ⭐ 3.5/55. Broadlink RM MAX Matter IR RF Smart Hub
Wi-Fi, BLE, IR, 433MHz RF, Matter, local scenes · 22 ratings
Buy Here →
The RM MAX is Broadlink’s newer hub, listed with Wi-Fi, BLE, IR and RF, Matter compatibility and local control with offline scenes, plus Alexa, Google and SmartThings support. As with the RM4 family, the listing states rolling code RF devices are not compatible. It is very new: only 22 ratings averaging 3.5 stars, so treat it as an early-adopter pick and check recent reviews before buying.
✅ Pros: Matter and local offline scenes.
❌ Cons: Only 22 ratings so far; mixed early feedback.
🎯 Verdict: Worth watching for Matter homes, but the RM4 Pro is the safer buy today.
🔌 BEST WIRED INSTALL · ⭐ 3.5/56. BOND Bridge Pro With Ethernet and PoE
Ethernet port and PoE, motorised shades, fans, fireplaces · 76 ratings
Buy Here →
The BOND Bridge Pro targets bigger installs, especially motorised shades, and adds an Ethernet port with PoE per the listing, so it can sit in a ceiling void or comms cabinet powered from a PoE switch. It also covers ceiling fans and fireplaces and works with Alexa and Google Home. Reviews are fewer and more mixed than the standard Bridge (3.5 stars from 76 ratings), so buy it for the wired connection and shade support, not as a default.
✅ Pros: Ethernet and PoE for reliable placement.
❌ Cons: Mixed 3.5-star rating from 76 reviews.
🎯 Verdict: The BOND to choose when you want a wired, PoE-powered bridge.
🏠 BEST FOR TUYA AND SMART LIFE · ⭐ 3.8/57. MoesGo Wi-Fi RF IR Universal Remote Controller
IR + 433/315MHz RF learning, Tuya Smart Life app · 321 ratings
Buy Here →
If the rest of your home runs on Tuya or Smart Life, the MoesGo hub keeps everything in one app. The listing says it can learn from your original IR and fixed-code RF remotes, mentions 433 and 315MHz devices, and lists Alexa and Google voice control for things like A/C temperature, fans and fireplaces. Integration: Home Assistant reaches Tuya devices through the Tuya cloud integration, so expect cloud dependence. 3.8 stars from 321 ratings.
✅ Pros: Fits a Tuya home; IR and RF learning.
❌ Cons: Cloud-based; middling 3.8-star rating.
🎯 Verdict: A good RF and IR hub for an all-Tuya household.
🪟 BEST BUDGET TUYA HUB · ⭐ 3.8/58. MOES Wi-Fi RF IR Smart Home Universal Remote
433/315MHz RF and IR, Smart Life app, curtains and projectors · 91 ratings
Buy Here →
This MOES hub is listed for controlling 433 and 315MHz RF devices such as curtain and shade motors and projectors, alongside IR appliances, through the Tuya Smart Life app with Alexa and Google voice support. Functionally it overlaps the MoesGo above; choose on availability. Review count is modest at 91 ratings with a 3.8-star average.
✅ Pros: Dual-band RF plus IR in the Tuya app.
❌ Cons: Smaller review base; cloud dependence.
🎯 Verdict: A budget Tuya RF and IR hub for blinds and projectors.
🔦 CLEAREST COMPATIBILITY NOTES · ⭐ 3.7/59. Toyanc Wi-Fi Universal IR and 433.92MHz RF Hub
38kHz IR, 433.92MHz fixed-code RF, Smart Life app · 19 ratings
Buy Here →
The Toyanc hub controls 38kHz IR devices and 433.92MHz fixed-code RF devices from the Smart Life or Tuya app, with Alexa and Google voice control, per the listing. Its RF notes are blunt and useful: it learns compatible IR and 433.92MHz fixed-code commands and is not compatible with rolling-code or hopping-code remotes. It is a small, newer listing with just 19 ratings averaging 3.7 stars, so double-check recent reviews.
✅ Pros: Clear frequency and code-type notes.
❌ Cons: Very few reviews; lesser-known brand.
🎯 Verdict: A low-risk choice only if your remote is clearly 433.92MHz fixed code.
🎛️ BEST RF-CONTROLLED RELAY · ⭐ 4.4/510. MHCOZY 4-Channel Wi-Fi, Bluetooth and 433MHz RF Relay
4 dry contact channels, Wi-Fi + Bluetooth + 433MHz RF remote · 356 ratings
Buy Here →
Not a bridge for other devices, but the other half of an RF setup: the MHCOZY board is a 4-channel dry contact relay you control from the Tuya Smart Life app over Wi-Fi, or from a 433MHz RF or Bluetooth remote. The listing says the RF and Bluetooth remotes keep working when Wi-Fi is lost, that it supports fixed code, and the title lists 5V and AC/DC 7 to 32V power options. That makes it handy for gate openers, garage door buttons and low-voltage lighting. 4.4 stars from 356 ratings.
✅ Pros: Works offline from 433MHz remotes; four dry contacts.
❌ Cons: Tuya cloud app for Wi-Fi control; needs an enclosure.
🎯 Verdict: A low-voltage relay board you can trigger from 433MHz remotes and the app.
🛠️ BEST FOR A DIY ESP32 RF BRIDGE · ⭐ 4.2/511. AOICRIE CC1101 Transceiver Module With SMA Antenna
CC1101 transceiver, SMA antenna, sub-GHz bands · 79 ratings
Buy Here →
For makers, a CC1101 transceiver wired to an ESP32 is the classic DIY RF bridge. Open-source firmware projects such as OpenMQTTGateway and rtl_433_ESP support the CC1101 to receive and send sub-GHz signals into MQTT and Home Assistant. This module comes with an SMA antenna, and the title lists 315, 433, 868 and 915MHz; CC1101 boards are usually tuned for one band, so match the variant and antenna to your frequency. Expect soldering, wiring and firmware work. For more radio modules see our 433MHz RF modules guide. 4.2 stars from 79 ratings.
✅ Pros: Cheapest and most flexible; open-source friendly.
❌ Cons: Pure DIY: needs an ESP32, wiring and firmware setup.
🎯 Verdict: The radio to build your own local, cloud-free RF bridge.
🛒 Which One for Which Job
🪟
RF motorised blinds and screens
Broadlink RM4 Pro learning the blind remote, automated from Home Assistant.
🌀
Ceiling fans and fan lights
BOND Bridge, with matched fan protocols and speed control.
🔥
Gas or electric fireplace
BOND Bridge or Bridge Pro where supported by BOND’s software.
📺
TV, AC and RF gear in one room
RM4 Pro or MoesGo for IR plus RF from one hub.
🚪
Gate or low-voltage lighting
MHCOZY 4CH relay triggered by 433MHz remotes, the app or automations.
🛠️
Cloud-free DIY bridge
CC1101 plus an ESP32 running open-source RF gateway firmware into MQTT.
⚙️ RF Bridge Types Compared
| Aspect | Broadlink RM4 Pro | BOND Bridge | Tuya hubs (MOES, Toyanc) | DIY ESP32 + CC1101 |
|---|
| Home Assistant | Built-in integration, local ⭐ | Built-in integration, local ⭐ | Tuya cloud integration | MQTT, fully local ⭐ |
| RF learning | Learns fixed-code 433MHz ⭐ | Protocol database for fans | Learns fixed-code 433MHz | Decode and send with firmware |
| IR blaster | Yes ⭐ | Not the focus | Yes ⭐ | Add an IR LED yourself |
| Best device types | Blinds, outlets, screens, AV ⭐ | Fans, fireplaces, shades ⭐ | Blinds, AV, fans | Sensors, outlets, custom |
| Setup effort | App setup, easy ⭐ | App setup, easy ⭐ | App setup, easy ⭐ | Soldering and firmware |
| Review base | Thousands of ratings ⭐ | Thousands of ratings ⭐ | Tens to hundreds | Module-level reviews |
⭐ marks the strongest option in each row.
❓ Frequently Asked Questions
Can an RF bridge open my garage door?
Usually not. Most modern garage door openers use rolling-code remotes, which change the code on every press and cannot be learned by Broadlink, BOND or Tuya hubs. Use a dry contact relay wired to the opener’s wall button instead, such as the MHCOZY board here or a Wi-Fi dry contact module from our Wi-Fi relay module guide.
How do I know if my remote is 433MHz or 315MHz?
Check the label on the remote or its battery cover, the manual, or look up the FCC ID printed on it, which lists the operating frequency. US devices commonly use 315MHz or 433MHz, while European devices use 433MHz or 868MHz. Buy a bridge that lists your exact band.
Does the Broadlink RM4 Pro work with Home Assistant without the cloud?
Home Assistant’s Broadlink integration controls the RM4 Pro over your local network once the device is set up on Wi-Fi with the Broadlink app. You can learn RF and IR codes from Home Assistant and send them in automations.
What is the difference between an RF bridge and an IR blaster?
IR blasters send infrared light and need line of sight, which suits TVs, AV receivers and air conditioners. RF bridges send sub-GHz radio, which passes through walls and is used by blinds, fans, outlets and fireplaces. Hubs like the RM4 Pro do both.
Can I build my own 433MHz bridge?
Yes. An ESP32 plus a CC1101 transceiver running open-source gateway firmware can receive sensors and send fixed-code commands over MQTT to Home Assistant. It is fully local but takes more setup. Our 433MHz module guide covers simpler transmitter and receiver pairs too.
🏁 Final Verdict: Best 433MHz RF Bridges and Hubs
Our picks by job:
🥇 Best Overall: Broadlink RM4 Pro (with sensor cable)
Buy Here →📶 Best for 315MHz: Broadlink RM4 Pro 433/315MHz
Buy Here →🔌 Best Wired Install: BOND Bridge Pro (PoE)
Buy Here →🎛️ Best RF Relay: MHCOZY 4CH Wi-Fi + 433MHz Relay
Buy Here →🛠️ Best DIY Radio: AOICRIE CC1101 Module
Buy Here →For most homes, a Broadlink RM4 Pro is the most versatile way to get 433MHz blinds, outlets and IR gear into Home Assistant or Alexa, while the BOND Bridge is the easier answer for ceiling fans and fireplaces. Makers who want everything local can build their own bridge around a CC1101. This opens our 433MHz and sub-GHz series; see also our 433MHz RF modules guide, the SONOFF Wi-Fi devices roundup, Wi-Fi smart relay modules, the SwitchBot devices guide and our LoRa modules guide.
💬 What RF gadgets have you bridged into your smart home, and which remotes refused to learn? Share in the comments below.
All Amazon links above use our affiliate tag (microlab05-20). Purchasing through them supports microcontrollerslab.com at no extra cost to you. Prices and availability change frequently, so always confirm the current price on Amazon before buying.
