SW-420 is a cost-effective vibration sensor module consists of SW-420 and Comparator LM393. The module is embedded with an SW-420 Vibration Sensor, a 10K potentiometer to alter the sensitivity, and …
In the last tutorial, we learned about counter-type ADCs, which are single slope ADCs with an incrementing slope. Further, the counter value only increments until it matches the analog input …
The counter type analog-to-digital converter is a simple ADC, also known as a staircase or ramp analog-to-digital converter. As its name suggests, it uses a binary counter for the conversion …
In this tutorial, we will discuss slope-type or integration-type ADCs. In the last tutorial, we discussed successive approximation and flash-type ADC. There are two types of slope ADCs: single slope …
TMC2209 SilentStepStick is a step/direction driver for two-phase bipolar stepper motors having a current of up to 2.8A peak to peak and 2A RMS. It can drive a 2-phase bipolar …
LSM303 is a complete system-in-package module introduced by ST Electronics. The device is a small, high-performance module integrated with a triple-Axis accelerometer to measure the tilt angle or movement of …
In this tutorial, we will discuss the workings of a flash ADC. A flash ADC, or flash analog-to-digital converter, is the fastest type of ADC among all the other ADCs. …
In this tutorial, we will talk about successive approximation ADC. This type of ADC converts an analog signal into a digital signal using a binary search through all possible quantization …
DS9490R is a USB to 1-wire adapter embedded with 1-wire technology launched by Maxim integrated. This adapter is used to connect a 1-wire output sensor to a computer through a …
CP2102 UART module is the upgraded version of RS-232 Communicator introduced by Silicon Labs. It is a single CP2102 chip USB to UART Bridge with 12Mbps USB full speed. CP2102 …